1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 78Get this manual
1 33105 33106
Steering Housing ServiceHBF2
Disassembly
1Remove the cover screws and lift off the cover2Cut motor wires at the center of each spliceif required
3Remove five long silver colored screws (locations marked "l") securing rack assembly to steering housing
rn 4Lift rack off of the pinion and remove the cable assembly from housingrn 5Remove adjustment ring set screws[] 6Push adjustment ring down, away from motor tube and bearing Push motor tube up to expose pinion set screw and pin[] 7loosen pinion set screw (metric hex)Note that the triangle mark on the pinion flange is on the port side of the motor tube