1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 56Get this manual
Continuity TestNegative CircuitP.W.MModels INotel To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity [IJ
2Connect one meter lead to BLACK battery cableConnect second meter lead to BLACK and GREEN terminal in the foot pedalThe meter must show continuity If meter shows no continuity, repair or replace battery cables3Remove the steering housing cover
rnfootMove first meter leadsecond leadand GREEN terminal in 4to BLACK GREEN terminal pedal, and connect to in the
steering housing: The meter must show continuity If meter shows no continuity, repair or replace wiring harness between foot pedal and steering housing5Connect second meter lead to any bare metal part of adapter Meter must show continuity If meter shows no continuity, clean and tighten GREEN wire ground connection screws