1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 55Get this manual
Continuity TestNegative CircuitStandard Foot Control, Except HBF2 Models
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect one meter lead to BLACK battery cableLeave this meter lead connected for all the following tests
OJ 3Connect second meter lead to BLACK 14-Gafoot pedal terminal strip: The meter must show continuity
If meter shows no continuity, repair or replace battery cables4Remove the steering housing cover
5Connect second meter lead steering housing terminal strip:
to BLACK 14-Galead at
The meter must show continuity If meter shows no continuity, repair or replace wiring harness between foot pedal and steering housing6Remove indicator bulb from socketRemove motor from adapter housingDo not disconnect the motor leads at this time Carefully, uncover wire splice on BLACK 14-Gamotor lead or connect second meter lead to pin that will pierce wire cover