1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 53Get this manual

1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 53

Continuity TestPositive Circuit1224-Volt Hand Control Models

To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity
2Connect one meter lead

to RED battery cable
[}] 3Connect second meter lead to RED 12-Gabattery cable at battery side of 1224-Volt switch: The meter must show continuity4Move first meter lead

to WHITE battery cable
5Connect second meter lead to WHITE 12-Gabattery cable at battery side of 1224-Volt switch: The meter must show continuity If meter shows no continuity in either test, repair or replace battery cable6Move 1224-Volt switch to "12 V" position

}] 7Connect second meter lead forwardreverse switch:

Back to 1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021