1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 50Get this manual
12Connect second meter lead to GREENWHITE 18-Ga lead at terminal "3" of speed control switch Turn speed control to speed and depress ONOFF switchThe meter must show continuity If meter shows no continuity, refer to Speed Control Switch, this sectionContinuity TestPositive CircuitP.W.MModels
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Remove steering housing cover2Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity
3Connect one metertest light lead to RED battery cable
4Connect second metertest light lead to RED 10-Gabattery cable terminal in the foot pedal: The meter must show continuity If meter shows no continuity, repair connection or replace battery cable