1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 30Get this manual
1224-Volt SwitchStandard Foot Control Models
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity
switch at 24 volts, meter must show continuity when connected between the two RED leads
With switch at 12 volts, meter must show continuity when connected between the center RED lead and the WHITE lead Meter must show no continuity between any lead and the switch's metal case
2Replace switch if your test results are different3Refer to Section for assembly information1224-Volt SwitchHand Control Models
To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Remove the steering housing cover