1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 26Get this manual
Controller TestP.W.MModels INotel To avoid damaging components, temporarily disconnect battery cable before proceeding rn BLACK motor tube wires fromcoverDisconnect RED 1Remove the steering housing and terminal block and push
wires aside for test[] 2To provide load for the controller output, move direction indicator bulb BLACK wire to the BLACK wire terminal from the controller, and indicator bulb RED wire to the RED wire terminal Connect voltmeter positive lead to controller RED wire terminal and voltmeter negative lead to controller BLACK wire terminal 3Reconnect battery cableTurn speed control wheel to SLOW positionSee instructions in P.W.MController and Motor Test in this section to find "Zero" point4Turn speed control wheel to each position, starting with zero degrees, push ONOFF switch, and note voltage readingVoltage at Indicator Light Speed Control Position Angle