1999 "EE" Outboards Accessories Service Manual, P/N 787026, Page 50Get this manual
4Push the pin into the shaft and install the cam on the shaft over the pin with notch on leftPush the cam down to contact the spacerThe pin will snap into place in the cam slot5Place the cable mounting plate on the detent plate
[] 6Lubricate the back of the shift leverLightly lubricate the cam, rollers, and roller slotsInstall rollers in slots and shift lever over cam7Lubricate the two slots in the camPush the pin into the shaft and place ring's upper tab in slot above pinPush pin at bottom of ring into cam slot and spring will push pin on ring into cam8Place the friction adjustment screw in the spring, lubricate it, and install it in the shift lever supportLightly lubricate in and around the support flanges