1999 "EE" Outboards Accessories Service Manual, P/N 787026, Page 48Get this manual
20Remove the friction adjustment screw and spring from the shift lever support or detent plate spacer21Remove the cable mounting plate and shift lever from the driveshaft' detent plate, and shifter cam22Remove the shift lever from the cable mounting plateRemove the rollers from the shift lever
23Remove the neutral warm-up ring from the cam by pushing drive pin into shaft with ring and lifting ring out of the assemblyPush pin into shaft and carefully lift cam off of shaftHold finger over pin as cam is lifted to prevent pin from becoming projectile