1999 "EE" Outboards Accessories Service Manual, P/N 787026, Page 5Get this manual
11 General Safety Warnings Before working on any part of the outboard, read the section called Safety at the end of this manualWhen replacement parts are required, use genuine OMC parts or parts with equivalent characteristics including type, strength, and materialFailure to do so may result in product malfunction and possible injury to the operator andor passengersReplace any locking fastener (locknut or patch lock screw) if its locking action becomes weakDefinite resistance to turning must be felt when reusing locking fastenerIf replacement is indicated, use only authorized replacements or equivalentsAfter each repair or installation, verify that all cables and wires have sufficient clearance through all engine steering and tilting angles to avoid binding or chafingLessen the possibility of fire and explosion under the engine cover by making sure electrical wires are routed and clamped in their original positions, away from rotating parts which can damage wire insulationThe engine cover is machinery guardUse caution when conducting tests on running enginesDo not wear jewelry or loose clothingKeep hair, hands, and clothing away from rotating flywheelTo prevent possible eye injury, always wear SAFETY GLASSES while servicing the unitAlways read and follow safety related precautions found on containers of hazardous substances like parts cleaners, primers, sealants, and sealant removers