1999 EE Johnson Outboards 25, 35 3-Cylinder Service Manual, Page 209Get this manual
Assembly
safety glasses while disassembling and assembling manual starters because of rewind spring tension 1Install mandrel (Kit, PI 342682) in vice and place spring around mandrel as shownW
2Place housing over mandrel and route hook end of spring through housing opening3Place pulley over mandrel and secure with pulley retainer (taper toward pulley) and left hand thread nut (Kit, PIN 342682)
rn 4Pull lightlywith handle to eliminate slackuntil springpulley on spring and turn counterclockwise (Kit, PI 342682) hook