1999 EE Johnson Outboards 25, 35 3-Cylinder Service Manual, Page 178Get this manual
[] 8Apply OMC Triple-Guard grease to the inside and outside of the lower bushing CD and install it into the bottom of the swivel bracket[] 9Apply OMC Gasket Sealing Compound to the outside case of new lower seal Q)Use suitable tool and drive the seal into place until flush with the outside surfaceApply OMC Triple-Guard grease to the seal lips I1Q]
10Apply OMC Triple-Guard grease to the inside and outside surfaces ofthe friction block or upper bushing If equipped with friction screw, install the block with the metal plug facing toward the steering friction screw Tighten the friction screw, if equipped, just enough to keep the block in placeOvertightening the friction screw will make installing the steering arm assembly difficult11Apply OMC Gasket Sealing Compound to the outside case of new upper seal Use suitable tool and drive the seal into place until flush with the outside surfaceApply OMC TripleGuard grease to the seal lips