1999 EE Johnson Outboards 25, 35 3-Cylinder Service Manual, Page 98Get this manual
Ignition Coil Tests A wide variety of ignition testers are available from various manufacturersIn addition, some automotive testers having the proper specifications can be usedDetailed instructions for the use of any tester are provided with the unit, therefore, only general information is given hereRefer to he manual of the ignition tester you are using for coil specifications Specifications will vary among testers Ignition coil must be removed from powerhead for power and leakage testingDRC6004
avoid possible shock hazards and to prevent leakage, perform all tests to the coil on wooden or insulated bench topSpecifications
Primary Resistance Secondary Resistance Operating Amps (Max) Analyzer Polarity
Merc-O- Tronic Magneto C.DCoil PIN 584826 0.28 0.05 1.5 amps
DRC6003
2300 300
Stevens 1.1 amps
PCE 0043
Ohmmeter Test
Resistance tests can be performed while the ignition coil is still mounted to the powerhead1Twist and remove the spark plug and primary leads from the ignition coilDR4081