1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 203Get this manual

1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 203

v DRC6245 DRC6246A

Trim Gauge Troubleshooting

1Turn key switch ONUsing voltmeter, check for voltage between the trim gauge "I" and "G" terminals If no voltage, check condition of instrument harness, key switch, and engine 20-amp fuse If voltage, go to Step 2
2Remove the whitetan lead from the trim gauge "S" terminalWith key switch ON, gauge should indicate full-trim DOWN positionNow connect jumper wire between terminals "S" and "G"Gauge should indicate full-trim UP position If your results are different, replace the trim gauge If your results agree, refer to Trim Sender Troubleshooting11

Back to 1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023