1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 190Get this manual

1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 190

Reassembly

1Install armature into brush plate brushes on commutator surface

be careful to align

2Place new O-ring onto brush plate from housing to terminate on brush plate
Connect wires

3Assemble housing onto brush plate while pulling ires gently through housingInsert and securely tighten retaining screws 4Apply silicone sealant to wire grommet retainersecurely tighten wire retainer screw

Back to 1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023