1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 146Get this manual

1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 146

5Remove lead assembly Q) from swivel bracket starboard stern bracket (1)

INote Stern bracket removed for reference only6Remove starboard tilt tube nut (7Remove tilt tube 8Remove anode and inspect for corrosion or wear9Remove swivel bracketInspect and, if necessary, replace tilt tube bushings 10Remove tilt lock lever assembly and spring Remove tilt pin and lever assembly Reassembly Reassemble in the reverse order of disassembly, with special attention to these steps
INote Before

proceeding, be sure all components have been thoroughly cleanedReplace any seals that have been removedInspect all bushings for evidence of deterioration1Coat tilt tube bushings with CIVIC Triple-Guard grease and, if removed, install in swivel bracket&

Back to 1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023