1999 "EE" Evinrude 70HP 4-Stroke Service Manual, P/N 787023, Page 115Get this manual
Camshaft and Crankshaft Position Sensor Gap
[] 1Set gap between sensor and reactor plate to 0.030 in(0,75 mm) on cam pulley[] 2Set gap between sensor and reactor plate to 0.030 in(0,75 mm) on flywheelPowerhead Removal
& To avoid accidental starting of engine, twist and remove all
spark plug leads before beginning service
[] 1Loosen shift lever shaft nut enough to disengage shift rod from lever[] 2Remove screws and nuts retaining the exhaust manifoldRemove hoses to thermostat, adapter, and oil sump along with manifold and gasket