1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 296Get this manual
13 37396
9Install bracket on end capApply OMC Screw Lock to threads and torque screw to 95-100 in.lbs(11-12 Nm)10Install pinion base and pinion on armature shaft11Install spacer and spring on armature shaft
12Install cup on armature shaftPress cup down on spring and install retaining ring in groove on armature shaft
I1ID 1Note
Pull cup up over retaining ring and verify ring seats in both shaft and cup grooves to allow full bendix travel13If cup won't pull up over ring, use screwdriver or similar tool to compress ring1TIl14Install protective cap over armature shaft and spacer15Refer to No Load Current Draw, Electric Starter to check starter operationInstallation