1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 293Get this manual

1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 293

Solenoid Tests

All engine wiring must be disconnected from the solenoid before proceeding with this test1Calibrate ohmmeter on appropriate scaleConnect one lead to terminal and the other lead to terminal The ohmmeter should show high reading If the ohmmeter reading is low reading, replace the solenoid

2Attach positive battery jumper to terminal and negative battery jumper to terminal The solenoid should close with an audible click The ohmmeter should show low reading If the ohmmeter reading is high readingreplace the solenoid 3After installing the solenoid, coat all wires and terminals with

OMC Black Neoprene Dip
No Load Current Draw, Electric Starter

INote Securely

fasten starter in vise or other suitable fixture before proceeding with this check

Back to 1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022