1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 255Get this manual
17Oil new a-ring and install it on the pivot pinApply ave Nut Lock to the threads of the pivot pin Use the yoke locator to locate the pivot pin hole in the yokeInstall and tighten the pivot pin to 48-84 inIbs(5-9 Nm)
18Coat the threaded area of the shift rod with ave Triple-Guard greaseSlide the shift rod down through the shift rod bushing and thread it into the yoke until seatedThen back out shift rod until the jog is facing towards the front of the gearcase
rn 19Apply ave of forward gearGrease to thrust washer and Needle Bearing install in relief area
20Using long-nose pliers, place the clutch dog in the cradle with grooved side facing the forward gear
!Ill Note Groove on the clutch dog must face the forward gear[] 21Apply ave Needle Bearing Assembly Grease to the