1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 231Get this manual
Assembly
1If any of the swivel bracket components were removed, refer to the reference picture for correct assembly2Install the upper thrust washer on the pivot tube
[] 3Install the liner on the pivot tube with the hole towards topAlign the protrusion on the friction block with the hole in the liner and install on liner
4Install the pivot tube in the swivel bracket aligning the friction block with the relief in the bracket5Install the lower bushing on the pivot tube aligning the opening in the bushing with the grease fitting on the swivel bracketPush the bushing up until it stops