1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 227Get this manual
Installation
[] 1Apply OMC Triple-Guard grease to the steering handle sleeve and install it in bracket2Attach steering handle to the bracketTighten the nut just enough so the handle will maintain any position
& Replace the handle locknut if it has lost its locking feature[] 3Use OMC Pin Insert Tool, PIN 322697, to install the stop button black wire into the 3-pin Amphenol plug
rn 4Position the stop ground wire behind thetoport sideinIbsof the ignition module and install the screwTorque 48-96
(5,4-10,8 Nm)
5Thread anchor onto cable housing until anchor is l in(3 mm) from aft end of housing threadsInstall screw and washer to retain the throttle cable anchorTorque to 48-96 inIbs(5,4-10,8 Nm)6Install the throttle cable clevis end onto the throttle arm