1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 176Get this manual
Assembly
Lubricate parts for assembly using Johnson or Evinrude Ultra 4-Stroke Crankcase Oil
Cylinder Head
1If removed, install valve spring seats in cylinder head
2Lubricate new valve seals with oil and push onto valve guide until seated42166
[] 3Lubricate valve stems with oil and insert in cylinder head4Install the valve spring and cap Compress with avtC Valve Spring Compressor, PIN 341446, and install keepers
[] 5Lubricate camshaft lobes, cam bearing journals, and bearing bores with oilCarefully install cam 6Lubricate rocker shaft, rocker arm bores, and tappet adjusting screws and nuts with oilLubricate rocker arm faces with oilInstall shaft, arms, springs, and spacersAlign locating pin rocker shaft with relief in the headPush shaft in until seated