1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 102Get this manual
2 Ohmmeter TestStop Button
All ohmmeter tests must be performed with the engine NOT running
[] 1Most steering handles contain combination stop buttonemergency stop device When the clip and lanyard assembly is removedthe emergency stop device is in the STOP position When the clip and lanyard assembly is installed, the emergency stop device is in the RUN position To stop the engine when the clip and lanyard assembly is in place, press the stop button until the engine stops
2Install the clip and lanyard
3Calibrate an ohmmeter on appropriate scaleConnect meter leads between stop button end of connector, terminal "C", and clean engine ground The meter must show high reading