1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 92Get this manual
To remove the ignition module, turn crankshaft to position lower belt guide opening over ignition module sensorsThis allows sensors to clear wheelignition module
rn 5Remove screws retaining the ignition module Remove
6Remove screws retaining the ignition coil to powerheadRemove coil with plug wiresInstallation
1Place ignition coil in position and torque screws to 48-96 inIbs(5,4-10,8 Nm)
[] 2Place the ignition module in pos ition and torque screws to 60-84 in Ibs(7-9 Nm)