1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 88Get this manual

1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 88

rncoil On two-cylinder models, move meter red lead to remain4ing spark plug terminal Meter must show high reading 5Calibrate ohmmeter on appropriate scaleConnect meter red lead to one of the coil's spark plug terminalsConnect meter black lead to remaining coil spark plug terminalMeter must show: thru 15
56 2300 300 275 50

[] 6Test spark plug leads for continuity Calibrate ohmmeter on low ohms scaleAttach one ohmmeter lead to each spring terminalWhile wiggling both spark plug covers and entire length of the spark plug lead, the resistance should remain near zeroReplace spark plug lead if your test results varyTests Using Ignition Analyzer

INote When conducting these tests to the coil, do not exceed its
maximum specified amperage Power Test []] INotel When using a