1999 "EE" Evinrude 5 thru 15 4-Stroke Service Manual, P/N 787022, Page 66Get this manual
[] 2To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms3To test solenoid valve and seat:
Lightly pressurize inlet fitting with alcohol and syringe
With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittings
[] 4To inspect or replace internal components, remove he four solenoid cover screws
5When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation