1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 195Get this manual
Installation
1Place the exhaust housing in the steering arm and lower bracket
2Apply OMC Locquic Primer and OMC Nut Lock to the threads of the upper mount screwsInstall the upper and lower mount screws loosely3Torque the screws
Upper two: 50-60 ftIbs(68-81 Nm) Lower four: 38-45 ftIbs(51-61 m)
1241 1251
4Attach the ground lead and star washer to the steering arm's starboard side5If necessary, replace the seal, exhaust adapter to lower engine coverAttach it with OMC Adhesive 6Install gearcase as described in Section 11