1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 191Get this manual
10Install the starboard locknutReplace locknut if definite resistance is not felt
1 11 251 1261 1271 12s1
11Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut Va to 1f4 turn12Install the tilt cam and collar on the tilt tube13Install the steering shaft and thrust washer
14Install the steering shaft keeperApply OMC Locquic Primer and OMC Nut Lock to the splines of the steering shaft and lower mount bracket
15Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to: