1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 172Get this manual
[] 37Tighten the rod cap screws to torque of 25-30 in Ibs(2-3 Nm)38Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
rn area offramejaw is centered in the side so the rod Position onto the connecting rod the contact the of
Tighten forcing screw until jaws contact connecting rod Slide frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter
The above procedure must be followed to assure frame is squarely in position39Tighten the forcing screw to torque of 23 inIbs(2,5 Nm) 21 605