1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 148Get this manual
W 4Install oil pumpinjector assembly on engine bracket and tighten screws to 45-55 inIbs(5-6 Nm)[] 5Connect injector electrical connector and oil pressure switch wireInstall lower pulse hose on oil pump and injector to tank hoseSecure with tie straps[] 6Install oil supply hose on oil pump assembly and secure with clampInstall upper pulse hose on oil pump and secure with tie strap[] 7Start engine and restrict oil return line between oil injector outlet port and check valveVerify all oil distribution hoses are purged of airContinue restriction for an additional twenty secondsEliminate restriction and verify oil flow by checking oil return discharge at oil tankCheck for fueloil leaks8Verify for proper oil delivery operation following procedure outlined in Section 4, DiagnosticsAction StepsOil System