1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 114Get this manual
IJJ 8Disconnect the electrical connector and fuel line from the filter
9Remove the fuel lift pump to filter hoseRemove screws and spacers retaining filter bracket and remove assembly10Remove lift pump pulse hoses at crankcase
11Remove fuel tank to lift pump hose and oil manifold to lift pump hose at teeRemove locknuts retaining bracket and lift pumpRemove assembly
]] 12Remove locknuts and screws retaining lift pump to bracketRemove lift pump
13Disconnect fuel injector connector and remove injector flange screwsRemove injector
Assembly and Installation
INote Injector inlet ports are larger diameter than outlet ports[[] 1Place injector in position and install screws through flangeTighten screws alternately until seatedTighten to 144-168 inIbs(16-19 Nm)]] 2Install lift pump on bracket and secure with screws and locknutsTighten to 40-50 inIbs(4,5-5,5 Nm)