1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 85Get this manual
DUse OMC Test Probe, PI 342677 to measure voltage at SAC whitel red wire while cranking engineMeter should show about 20V OKsuspect poor connection in the 40V circuit No voltagereplace the SACConclusion The fuel system should now operate properlyIf some cylinders are still runn ing lean or rich, look for crankcase air leaks, ignition problems, or test individual components such as the injectors Action StepsIgnition System
INote Retrieve
any service codes prior to beginning troubleshootingCorrect all conditions related to service codes FIRSTprevent injury, all spark plug leads nected to spark tester adjusted to 716 incranking testsDo not attach spark tester bracketsBe sure spark tester is held at least from all wires and sensor leadsmust remain con(11 mm) during all to the ECU or its in (51 mm) away
Step 1: Visually inspect all connections and groundsPerform resistance test across all ground connectionsReading MUST be ohmsBe sure to calibrate meter before testing7 16