1999 "EE" Evinrude 200, 225 V6 FFI Outboards Service Manual, P/N 787025, Page 17Get this manual
Connect Control CablesMove control to FULL THROTTLE positionMove engine throttle lever to full throttle positionInstall throttle cable guide on throttle leverInstall washer and clip to secure guide m []]
With the remote control in NEUTRAL and the fast idle lever down, adjust the throttle trunnion so there is clearance between the cam roller and the cam You should be able to just pull and push paper between the throttle link and the throttle stopIf foot throttle is used, positive stop must be providedIf the throttle lever or pedal pulls the throttle cable tight, the Throttle Position (TP) sensor might be pulled out of normal range, the "Check Engine" Light will turn ON, and the engine will not accelerate above idleMove control to REVERSEMove engine shift lever to REVERSEInstall guide on shift leverInstall washer and clip to secure guideMove control to NEUTRALHold cable next to trunnion bracketTrunnion must align with bracket pocket