1999 "EE" 90, 115 FFI, 150, 175 V4, V6 FFI Outboards Service Manual, P/N 787024, Page 173Get this manual
7Lubricate new lower housing a-ring with OMC TripleGuard grease and place the a-ring on the lower housing
8Lubricate seal lip with OMC Triple-Guard grease and place lower bearing seal housing on crankshaft
[] 9It is very important to notice that there are port and starboard pistons in this engineAll pistons are also markedexhaust side" Using these marks, orient the pistons with the correct cylinders and mark the bottom wrist pin hole with an indelible marker[] 10It is very important to notice that the connecting rods have top and bottom diagonal oil hole
will always face the flywheel
11 Apply OMC Needle Bearing Grease to the 28 wrist pin bearingsInstall the bearings in the wrist pin boreAlign the bearings in the bore using OMC Wrist Pin Bearing ToolPIN 336660