1998 Johnson Evinrude "EC" Accessories Service Manual, P/N 520213, Page 145Get this manual
0I43087 43086
34Located under the trim check valve is one return spring for the pump control pistonUsing long-nosed pliers, remove the springDo not attempt to remove the pump control piston35Using drag link socket or similar tool, remove the reverse lock check valve
15S1 1591
36Using long-nosed pliers, remove the pump control piston and spring
37Clean and inspect the components of the pump control pistonReplace if necessaryBoth of the springs are identical and can be interchanged38Service the three short valves and one long valve as follows: aClean the valves in clean, mild solvent and replace the O-rings if necessaryDo not allow these valves to soak in solvent, as they have soft rubber seats within them