1998 Johnson Evinrude "EC" Accessories Service Manual, P/N 520213, Page 107Get this manual
33-Cylinder, 60 and 90 V4, and 60 V6Three of the four springs are one length, and the fourth spring is shorterOn assembly, the shorter spring can be positioned in any hole in the piston Set piston aside
4Using screwdriver, carefully pry the scraper out of the end capDiscard the scraperRemove and discard the large outer O-ring5Remove and discard inner O-ring of the end cap
Tilt Rod Reassembly
1Clean the end cap thoroughly, then lubricate and install new O-ring in the end capLubricate and install new scraperThe scraper is installed with the lip facing outThen lubricate and install new O-ring on the outside of the end cap