1998 Johnson Evinrude "EC" Accessories Service Manual, P/N 520213, Page 51Get this manual
[] 10Lubricate the neutral warm-up rod and shift lever supportInstall the two springs and warm-up rod in the support
[]] InThe warm-up rod springs can fly out of position and
cause an injury or become lostHold warm-up rod down and hold springs in place until they are held in place by shaft support in Step 1211Lubricate inside surface of the shaft support
12Place the shaft support on the shaft and press firmly together13Install the washer and retaining ring on the shaft14Lubricate the spacer and roller Install the spacer over the shaft and the roller on the pin
15Lubricate the slots in the throttle camInstall the screw with washer through the cam and bushing and align cam groove with the roller Install the throttle cam and secure with nutTorque to 25-35 in Ibs(2,8-4,0 Nm)16Put the inner friction shoe in place over the friction adjustment screw