1998 Johnson Evinrude "EC" 90, 115 SPL Service Manual, P/N 520209, Page 216Get this manual
1 Assembly
1If the reverse gate was removed during disassembly, install reverse gatebushingsand shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact
2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely
rn 3Place any other positionposition shownThe roller will not roller into cam in assemble in
4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushing