1998 Johnson Evinrude "EC" 90, 115 SPL Service Manual, P/N 520209, Page 211Get this manual
Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing
2Remove four bearing housing retaining screws, and remove bearing housing assembly from jet housing
rn &.glasses and proceed with with retaining ring pliersWear 3Remove retaining ring safety care to avoid unsnapping the
ring from the pliers
rn 4Remove O-rings from housing and discard&
5Warm bearing housing with propane torch to aid in removal of upper seal carriernot apply too much heat as seals or carrier may be
INote Do
damaged
6Allow bearing housing to cool until it is warm to the touch
rn 7Place ofthe driveshaft until the sealacarrier isPress from the bearing housing assembly in pressimpeller end free from the