1998 Johnson Evinrude "EC" 90, 115 SPL Service Manual, P/N 520209, Page 157Get this manual

1998 Johnson Evinrude "EC" 90, 115 SPL Service Manual, P/N 520209, Page 157

15modelsinstall the pump to the powerheadIf the oil hose was removed from the engine, the following procedures must be completed: Purge air from oil hose before installing Add lubricant to the fuel tank at 50: fueloil ratio Mark the oil level on the tank
Check to see that level in oil tank has changed BEFORE using unmixed gasoline
INote Failure to complete the above procedures could

result in

extensive powerhead damage due to lack of lubrication
16Connect the water indicator hose to the fitting in the lower engine cover17Perform all linkage adjustments and verify full advance ignition timing before returning engine to customerRefer to Synchronization and Linkage Adjustments, Section 1