1998 Johnson Evinrude "EC" 90, 115 SPL Service Manual, P/N 520209, Page 152Get this manual
12911301
37Secure restraining jaw
"e" and forcing
38Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)
39Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact connecting rod
1331 INotel 1341
Slide frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter