1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 289Get this manual
Installation
1Apply CIVIC Locquic Primer and OMC Nut Lock to the threads of the top starter mounting screws
2Position the starter and install the mounting screwsTorque to 14-16 ftIbs(19-22 Nm)3Attach ground wire and yellowred wire from ne,utral start switch to small posts on the bottom of the solenoidTighten nuts securely4Attach red rectifierregulator, engine cable, and power trim cable wires to large solenoid postTighten nut securely5Apply CIVIC Locquic Primer and OMC Nut Lock to the th reads of the negative battery cablebottom starter retaining screw
12611271 12s1
6Attach power trim and connector ground wires to starter flangeTighten screw securely