1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 268Get this manual
Assembly
1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact
2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely3Place roller into cam in position shownThe roller will not assemble in any other position
4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushingeccentric nut