1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 245Get this manual
21 Remove the plmon bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining ring on top side of the pinion bearing using long-handle needle-nose pliers such as Snap-on No911CP or equivalent If the pinion bearing must be replaced, use OMC Bearing Remover and Installer, PIN 391257, and assemble it as follows:
Flange Nut, PIN 326586 Plate, PI 391260 Q) Rod, PIN 326582 Remover, PI 326579
1Note Make sure all loose needles are inside bearing case before pulling bearingThe needles will provide surface for the remover tool to pull against