1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 232Get this manual
12 14156
6Lightly apply ONIC Triple-Guard grease to new a-ringInstall the a-ring in top groove of the bearing housing
INote Do not install the -ring in the bearing
housing's bottom groove The bottom groove is an oil passageGearcase damage could result
Driveshaft Servicing
1To separate the upper driveshaft from the lower driveshaft, remove the roll pinReplace the damaged component
2To assemble the driveshaft, install the driveshaft retainer into the groove of the upper driveshaft
3Install the upper driveshaft into the lower driveshaft, aligning the holes in the driveshaft retainer and the lower driveshaft4Install the roll pin: