1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 231Get this manual
6 42298 14155
7V4Use orJIC Seal Installer, PI 342665 to install new seal in rear of the bearing housingApply orJIC DPL Penetrating Lubricant to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply orJIC TripleGuard grease to the seal lips after installing8V6Use orJIC Seal Installer, PI 341439, to install new seal in the rear of the bearing housing Apply orJIC DPL Penetrating Lubricant to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OIIIC Triple-Guard grease to the seal lips after installing
DRC5721
rn 9Lightly apply orJICO-ring(s) in groove(s) to athe housingTriple-Guard grease new bearing housing O-ring(s)Install in