1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 177Get this manual
6Examine the pulley and the starter housingLook for sharp edges and rough surfaces that could fray the starter ropeFile and polish to remove7Examine the starter and the starter lockout partsReplace any worn or damaged parts Assembly
safety glasses while disassembling and assembling manual starters because of rewind spring tension1Place the starter spring shield 2Using QVIC Starter
into the starter housing Winder and Installer,
PIN 392093, clamp spring winder base in viseInsert release
into spring winder base
3Apply QVIC Triple-Guard grease or Lubriplate 777 to the rewind springInstall the rewind spring into the spring winder base with open loop of spring facing inwardInsert the pin of the crank and pin assembly into the loop of the rewind spring Secure the crank and pin assembly to the starter winder base with the crank retainer screw