1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 171Get this manual

1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 171

[] 10Connect trim sender lead bullet connector, and 2-pin connector m 11Connect two tilt limit switch connectors
bluewhite lead bullet

12Install the lower engine cover halves and tighten the four screws13Connect three trimtilt switch lead bullet port coversin

[] 14Connect power trimtilt connector15Attach negative battery cable to starter flange with screw Tighten to 14-16 ftIbs(19-22 Nm)Attach positive battery cable to large solenoid post with lock washer and nut Tighten securelyCoat connections with 0I1C Black Neoprene Dip16Place fuel fitting bracket in lower coverSecure bracket with screw17Attach fuel and electrical cover to the lower motor cover and secure with screw 18Replace air silencer