1998 Johnson Evinrude "EC" 90, 100C, 105C, 115, 150, 150C, 175 60 deg. LV Service Manual, P/N 520210, Page 168Get this manual
12311241 frame
31Secure restraining jaw
and forcing jaw "0" to
32Tighten the rod cap screws to torque of 25-30 in Ibs(2-3 Nm)
33Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact connecting rod
Slide frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter
The above procedure must be followed to assure frame is squarely in position34Tighten the forcing screw to torque of 23 inIbs(2,5 Nm)